Media Converter / Switch, Singlemode, 60km Gigabit, 10/100/1000BaseTX to 1000BaseFX (SFP with LC) Four Copper Ethernet Ports, Two SFP Fiber Optic Ports

The ME-3860-SM60-SFP2 (singlemode) media converter transfers data over duplex fiber at 1000Mbps (at 1310nm) and connects to copper Ethernet at 10, 100 or 1000 Mbps while auto-sensing the correct speed. Maximum distance for this unit is 60km (37 miles). Other distances are available depending upon the SFP module used. Distance on the Ethernet side is 100 meters (328 feet) using Cat-5 or better (unshielded or shielded twisted pair) copper cable. The fiber connections are LC on an inserted SFP module and the copper Ethernet connection is RJ-45.

This unit includes one 60km Singlemode SFP module. An additional SFP module may be ordered for the second SFP port to further extend the fiber optic network beyond this media converter. Order additional SFPs here.

This unit has four RJ ports for copper Ethernet connections and two ports that accept SFP mini-GBIC modules. This allows the unit to act as a small Ethernet switch as well as a media converter. An example of this use would be to run a longer fiber link from your server/router to an open office location, and then you are able to connect the media converter to four local computers. You would also be able to then run another fiber link, from a SFP module in the second SFP port to another similar unit and serve another group of computers, printers, etc. To use the second SFP port, you would have to buy another SFP module, which we can sell separately.

TECHNICAL SPECIFICATIONS

Power: 5vdc at 2amp. Power supply included operates at 110-240vac at 50-60Hz.

Operating temperature: 0° to 60°C (32° to 140°F)
Operating humidity: 5% to 90% (non-condensing)

Dimensions: 5.6”W x 4.4”H x 1.2”D (14.2m x 11.2cm x 3.0cm)
Weight (media converter only): 13.4oz (0.4kg)

Fiber connections: LC, Singlemode SFP module (Accepts up to two SFP modules)
Copper connection: RJ-45 (standard Ethernet) (Four ports available)

Fiber cabling: Singlemode: duplex, 8-10/125.
Maximum distance: Singlemode: 60km (37mi).

Data rate copper (Ethernet): 10Mbps, 100Mbps, or 1000Mbps (automatically selected)
Data rate fiber: 1000Mbps, Supports up to 10kb JUMBO frame

Laser wavelength: Singlemode 1310nm

Transmission Power: 1310nm SM 60km: 0 to -3dBm

Receiver Sensitivity: 1310nm SM 60km: <-25dBm

Buffer memory: 2Mb, 1.4Gbps bandwidth

Auto-MDIX: Automatically senses configuration of copper cable

Diagnostic LED’s:
* Copper link connection / link activity
* Copper link speed (10, 100, or 1000Mbps)
* Fiber signal detect
* Fiber link connection / link activity
* Power on

Standards: IEEE802.3, IEEE802.3U, 10/100/1000Base-T/TX, 1000Base-FX/LX

Flow control: IEEE802.3x flow control for full-duplex mode, back-pressure flow control for half-duplex mode.

Compliance: FCC Part 15, CE

Item #: ME-3860-SM60-SFP2
$330.00
Quantity: