Media Converter, Gigabit 10/100/1000BaseTX to 1000BaseZX (SFP with LC), Singlemode, 60km

Media Converters Singlemode: ME-3840-SFP-SM60

The ME-3840-SM60 (singlemode, 60km) media converter transfers data over duplex fiber at 1000Mbps (at 1550nm) and connects to copper Ethernet at 10, 100 or 1000 Mbps while auto-sensing the correct speed. Maximum distance for this unit is 60km (37miles) with the included SFP module. Distance on the Ethernet side is 100 meters (328 feet) using Cat-5 or better (unshielded or shielded twisted pair) copper cable. The fiber connections are LC on the SFP module and the copper Ethernet connection is RJ-45.

Please Note-- Price is for each unit. Normally two are required.

TECHNICAL SPECIFICATIONS

Power: 5vdc at 2amp. Power supply included operates at 110-240vac at 50-60Hz.

Operating temperature: 0° to 60°C (32° to 140°F) Operating humidity: 5% to 90% (non-condensing)

Dimensions: 4.25”W x 2.75”H x 1”D (10.8cm x 7cm x 2.5cm) Weight (media converter only): 6.5oz (0.2kg)

Fiber connections: LC, SFP module Copper connection: RJ-45 (standard Ethernet)

Fiber cabling: Singlemode: duplex, 8-10/125.
Maximum distance: Singlemode: 60km (37mi).

Data rate copper (Ethernet): 10Mbps, 100Mbps, or 1000Mbps (automatically selected)
Data rate fiber: 1000Mbps

Laser wavelength: Singlemode 1550nm

Buffer memory: 2Mb, 1.4Gbps bandwidth

Auto-MDIX: Automatically senses configuration of copper cable

Diagnostic LED’s:
* Fiber link connection / fiber link activity
* Ethernet link connection / Ethernet link activity
* Full duplex / half duplex
* Power on
* Ethernet transfer rate 1000Mbps, 100Mbps/10Mbps
* Fiber signal detected

Standards: IEEE802.3, IEEE802.3U, 10/100/1000Base-T/TX, 1000Base-FX/LX

Flow control: IEEE802.3x flow control for full-duplex mode, back-pressure flow control for half-duplex mode.

Compliance: FCC Part 15, CE, RoHS

PLEASE CALL FOR LENGTHS AND CONFIGURATIONS NOT SHOWN