Media Converter 10/100 to 100 BaseFX 1300nm MM 2km

Multimode: ME-3420-MM-ST, ME-3420-MM-SC

The ME-3420-MM (multimode) media converter transfers data over duplex fiber at 100Mbps (at 1300nm) and connects to copper Ethernet at 10 or 100 Mbps while auto-sensing the correct speed. Maximum distance for this unit is 2km (6500 feet) when using 50/125 or 62.5/125 multimode fiber. Distance on the Ethernet side is 100 meters (328 feet) using Cat-5 or better (unshielded or shielded twisted pair) copper cable. The fiber connections are SC or ST and the copper Ethernet connection is RJ-45.

Please Note-- Price is for each unit. Normally two are required.

TECHNICAL SPECIFICATIONS

Power: 5vdc at 2.5 watts. Power supply included operates at 110-260vac at 50-60Hz.

Operating temperature: 0° to 55°C (32° to 130°F)
Operating humidity: 5% to 80% (non-condensing)

Fiber connections: Multimode: ST or SC
Copper connection: RJ-45 (standard Ethernet)

Fiber cabling: Multimode: duplex, 50/125 (recommended) or 62.5/125.
Maximum distance: Multimode: 2km (6500 feet).
Data rate copper (Ethernet): 10Mbps or 100Mbps (automatically selected)
Data rate fiber: 100Mbps

Diagnostic LED’s:
* Fiber link connection / fiber link activity
* Ethernet link connection / Ethernet link activity
* Full duplex / half duplex
* Power on
* Ethernet transfer rate 100Mbps / 10Mbps
* Fiber signal detected

Standards: IEEE802.3, IEEE802.3U, 10/100Base-TX, 100Base-FX/LX

Flow control: IEEE802.3x flow control for full-duplex mode, back-pressure flow control for half-duplex mode.

Compliance: FCC Part 15, CE, RoHS

PLEASE CALL FOR LENGTHS AND CONFIGURATIONS NOT SHOWN