Media Converter, Fiber Optic Cable Shop, 1000Mbps, MM, 850nm, 275m/550m

Multimode: ME-3720-MMG-ST-850, ME-3720-MM-SC-850

The ME-3720-MMG-850 (multimode) media converter transfers data over duplex fiber at 1000Mbps (at 850nm) and connects to copper Ethernet at 1000 Mbps. The transmission distance for this unit is 275m when using OM1 fiber, 550m when using OM2 multimode fiber, and 1km when using OM3 fiber. Distance on the Ethernet side is 100 meters (328 feet) using Cat-5 or better (unshielded or shielded twisted pair) copper cable. The fiber connections are SC or ST and the copper Ethernet connection is RJ-45.

Please Note-- Price is for each unit. Normally two are required.

TECHNICAL SPECIFICATIONS

Power: 5vdc at 2.5watts. Power supply included operates at 110-260vac at 50-60Hz.

Operating temperature: 0° to 60°C (32° to 140°F)
Operating humidity: 5% to 90% (non-condensing)

Dimensions: 4.25”W x 2.75”H x 1”D (10.8cm x 7cm x 2.5cm)
Weight (media converter only): 6.5oz (0.2kg)

Fiber connections: Multimode: ST or SC
Copper connection: RJ-45 (standard Ethernet)

Fiber cabling: Multimode: duplex, 50/125 or 62.5/125
Maximum distance: Multimode: 1km OM3/OM4

Data rate copper (Ethernet): 1000Mbps
Data rate fiber: 1000Mbps

Laser wavelength: Multimode 850nm

Buffer memory: 2Mb, 1.4Gbps bandwidth

Auto-MDIX: Automatically senses configuration of copper cable

Diagnostic LED’s:
* Fiber link connection / fiber link activity
* Ethernet link connection / Ethernet link activity
* Full duplex / half duplex
* Power on
* Ethernet transfer rate 1000Mbps
* Fiber signal detected

Standards: IEEE802.3, IEEE802.3U, 10/100/1000Base-T/TX, 1000Base-FX/LX

Flow control: IEEE802.3x flow control for full-duplex mode, back-pressure flow control for half-duplex mode.

Compliance: FCC Part 15, CE, RoHS

PLEASE CALL FOR LENGTHS AND CONFIGURATIONS NOT SHOWN